Home
About
  1. Company
  2. Culture
  3. Honor
  4. Warehouse
  5. Customer
Products
  1. ABS
  2. PC
  3. POM
  4. PPS
  5. PEI
  6. PBT
  7. LCP
  8. PEEK
  9. Nylon
  10. PE
  11. PP
  12. TPU
  13. TPV
  14. TPE
  15. PMMA
  16. PVDF
  17. ASA
  18. HT-Nylon
  19. Alloy
  20. GPPS
  21. HIPS
  22. EVA
  23. PPO
  24. Spec-Nylon
  25. PSU
  26. PVC
  27. TPEE
  28. PCTG
  29. FEP
  30. COC
  31. PARA
Quotation
  1. Universal Plastics
  2. Press
  3. According
  4. Plastic sheet
  5. Plastic bar
  6. Plastic
Supply
Plastics application
  1. Conductive plastic
  2. Anti-static plastic
Plastic technology
  1. Company News
  2. Plastics information
  3. Plastic technology
Plastic Data sheet
Contact
  1. Contact information
  2. Online message
EN
  1. 中文
Tel: 188-1699-6168()
Address: Room 908, No. 28, Moyu Road, Anting Town, Jiading District, Shanghai

Scan the wechat code for consultation

Current position： Home > Plastic technology > Plastics information

SABIC PEI ULTEM

Release time：2025-06-20Author：小编

Previous article The next one Return
1010E 　 　 　 　
ULTEM 1010 Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C and improved flow. The material has internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material. The material is RoHS compliant and the natural, uncolored, material is halogen free according to standards IEC 61249-2-21, IPC 4101E and JEDEC JS709B. For colored variants compliance needs to be checked case by case. The base material is transparent amber colored but is also available in custom colors - transparent and opaque. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.AmericasAsiaEuropeGreater ChinaMEA
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 1) 　 　 　
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 50 % ISO 527
Tensile Modulus, 1 mm/min 　 3200 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 160 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
Hardness, Rockwell M 　 106 - ISO 2039-2
Tensile Stress, yld, Type I, 50 mm/min 　 115 MPa ASTM D638
Tensile Strain, yld, Type I, 50 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 50 mm/min 　 60 % ASTM D638
Tensile Stress, yld, Type I, 5 mm/min 　 110 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 60 % ASTM D638
Tensile Modulus, 5 mm/min 　 3350 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 165 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3200 MPa ASTM D790
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 160 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 3400 MPa ASTM D790
Hardness, Rockwell M 　 109 - ASTM D785
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy ASTM D1044
IMPACT 1) 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Izod Impact, unnotched, 23°C 　 1600 J/m ASTM D4812
Izod Impact, unnotched, -30°C 　 1500 J/m ASTM D4812
Izod Impact, notched, 23°C 　 32 J/m ASTM D256
Izod Impact, notched, -30°C 　 41 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 1174 J/m ASTM D256
Gardner, 23°C 　 33 J SABIC method
THERMAL 1) 　 　 　
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 209 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 192 °C ISO 75/Af
Vicat Softening Temp, Rate A/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/50 　 211 °C ISO 306
Vicat Softening Temp, Rate B/120 　 212 °C ISO 306
CTE, -40°C to 150°C, flow 　 5.20E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 5.20E-05 1/°C ISO 11359-2
Thermal Conductivity 　 0.22 W/m-°C ISO 8302
HDT, 0.45 MPa, 6.4 mm, unannealed 　 210 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 201 °C ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed 　 207 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 190 °C ASTM D648
Vicat Softening Temp, Rate B/50 　 211 °C ASTM D1525
CTE, -20°C to 150°C, flow 　 5.20E-05 1/°C ASTM E831
CTE, -20°C to 150°C, xflow 　 5.20E-05 1/°C ASTM E831
Thermal Conductivity 　 0.22 W/m-°C ASTM C177
PHYSICAL 1) 　 　 　
Density 　 1.27 g/cm³ ISO 1183
Moisture Absorption, (23°C/50% RH/24hrs) 　 0.2 % ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium) 　 0.7 % ISO 62-4
Water Absorption, (23°C/24hrs) 　 0.25 % ISO 62-1
Water Absorption, (23°C/saturated) 　 1.25 % ISO 62-1
Melt Volume Rate, MVR at 360°C/5.0 kg 　 25 cm³/10 min ISO 1133
Melt Volume Rate, MVR at 340°C/5.0 kg 　 13 cm³/10 min ISO 1133
Specific Gravity 　 1.27 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.25 % ASTM D570
Water Absorption, (23°C/Saturated) 　 1.25 % ASTM D570
Melt Flow Rate, 337°C/6.6 kgf 　 17.8 g/10 min ASTM D1238
Poisson's Ratio 　 0.36 - ASTM E132
Mold Shrinkage, flow, 3.2 mm 3) 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 3) 0.5-0.7 % SABIC method
ELECTRICAL 1) 　 　 　
Dissipation Factor, 1 MHz 　 0.006 - IEC 60250
Relative Permittivity, 50/60 Hz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0005 - IEC 60250
Dielectric Constant 4) 　 　 　
at 1.1 GHz 　 3.01 - -
at 5 GHz 　 3.02 - -
at 10 GHz 　 3.02 - -
Dissipation Factor 4) 　 　 　
at 1.1 GHz 　 0.0012 - -
at 5 GHz 　 0.0024 - -
at 10 GHz 　 0.0027 - -
Relative Permittivity, 100 Hz 　 3.15 - ASTM D150
Dissipation Factor, 100 Hz 　 0.0015 - ASTM D150
Relative Permittivity, 1 kHz 　 3.15 - ASTM D150
Dissipation Factor, 1 kHz 　 0.0012 - ASTM D150
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-410 °C 　
Nozzle Temperature 　 345-405 °C 　
Front - Zone 3 Temperature 　 345-415 °C 　
Middle - Zone 2 Temperature 　 340-405 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-180 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw speed (Circumferential speed) 　 0.2-0.3 m/s 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
EXTRUSION BLOW MOLDING 　 　 　 　
Drying Temperature 　 140-150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.01-0.02 % 　
Melt Temperature (Parison) 　 320-355 °C 　
Barrel - Zone 1 Temperature 　 325-350 °C 　
Barrel - Zone 2 Temperature 　 330-355 °C 　
Barrel - Zone 3 Temperature 　 330-355 °C 　
Barrel - Zone 4 Temperature 　 330-355 °C 　
Adapter - Zone 5 Temperature 　 330-355 °C 　
Head - Zone 6 - Top Temperature 　 330-355 °C 　
Head - Zone 7 - Bottom Temperature 　 330-355 °C 　
Screw Speed 　 10-70 rpm 　
Mold Temperature 　 60-175 °C 　
Die Temperature 　 325-355 °C 　
　 　 　 　 　
1010FC 　 　 　 　
ULTEM 1010FC resin is an amorphous, transparent polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217°C. This inherently flame retardant resin has UL94 V0, V2 and 5VA ratings and is RoHS compliant. ULTEM 1010FC resin is an unreinforced general purpose grade offering high heat resistance, high strength and modulus and broad chemical resistance up to high temperatures with easy flow. This grade is US FDA and EU Food Contact compliant and has NSF51 listing in selected colors. ULTEM 1010FC resin is not supported with biocompatibility information. For medical applications which require biocompatibility we offer ULTEM HU1010 resin.Europe
1100 　 　 　 　
Standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0, V2 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-101048254 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.4 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 85 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 10 % ISO 527
Tensile Modulus, 1 mm/min 　 3500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 140 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 185 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.37 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.65 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 12 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 17.2 kV/mm IEC 60243-1
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Comparative Tracking Index 2) 175 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
1100F 　 　 　 　
Standard flow Polyetherimide (Tg 217C). ECO Conforming. US FDA and EU Food Contact compliant. UL94 V0, V2 and 5VA listing. Effective June 2007, this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HU1100.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-101048254 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.4 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 85 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 10 % ISO 527
Tensile Modulus, 1 mm/min 　 3500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 140 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 185 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.37 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.65 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 12 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 17.2 kV/mm IEC 60243-1
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Comparative Tracking Index 2) 175 V IEC 60112
Comparative Tracking Index, M 2) 125 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
1110 　 　 　 　
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-101048292 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 80 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 10 % ISO 527
Tensile Modulus, 1 mm/min 　 3500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 140 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
Ball Indentation Hardness, H358/30 　 145 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 185 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.37 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.65 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 12 cm³/10 min ISO 1133
Melt Volume Rate, MVR at 360°C/5.0 kg 　 21 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 17.2 kV/mm IEC 60243-1
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Comparative Tracking Index 2) 175 V IEC 60112
Comparative Tracking Index, M 2) 125 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
1110F 　 　 　 　
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming. US FDA and EU Food Contact compliant, NSF 51 listing. UL94 V0 and 5VA listing. Effective June 2007, this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HU1110.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-101048269 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.4 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 80 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 10 % ISO 527
Tensile Modulus, 1 mm/min 　 3500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 140 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
Ball Indentation Hardness, H358/30 　 145 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 185 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Density 　 1.36 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.65 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 12 cm³/10 min ISO 1133
Melt Volume Rate, MVR at 360°C/5.0 kg 　 21 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 17.2 kV/mm IEC 60243-1
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Comparative Tracking Index 2) 175 V IEC 60112
Comparative Tracking Index, M 2) 125 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2100 　 　 　 　
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification in recognized colors.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-502535 - -
UL Yellow Card Link 2 　 E121562-102518191 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
UV-light, water exposure/immersion 　 F1 - UL 746C
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 7 kJ/m² ISO 179/2C
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 9 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 27 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0009 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0046 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2100F 　 　 　 　
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. US FDA and EU Food Contact Compliant, NSF 51 listing. WRAS certification in recognized colors.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-502535 - -
UL Yellow Card Link 2 　 E121562-102518191 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 7 kJ/m² ISO 179/2C
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 9 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 ≥1.E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 27 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0009 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0046 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2100R 　 　 　 　
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-502535 - -
UL Yellow Card Link 2 　 E121562-100732300 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 7 kJ/m² ISO 179/2C
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 9 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 27 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0009 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0046 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2110 　 　 　 　
10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-502535 - -
UL Yellow Card Link 2 　 E121562-101082080 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 7 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 13 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 27 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0009 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0046 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2110EPR 　 　 　 　
10% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 and 5VA listing.AsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E207780-100646554 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.4 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 119 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 119 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Modulus, 5 mm/min 　 5240 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 199 MPa ASTM D790
Flexural Stress, brk, 2.6 mm/min, 100 mm span 　 193 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 4800 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 5170 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 534 J/m ASTM D4812
Izod Impact, notched, 23°C 　 69 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 350 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 10 J ASTM D3763
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 210 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 210 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 205 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 212 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 207 °C ASTM D648
CTE, -40°C to 40°C, flow 　 3.60E-05 1/°C ASTM E831
CTE, -40°C to 40°C, xflow 　 8.10E-05 1/°C ASTM E831
Relative Temp Index, Elec 1) 155 °C UL 746B
Relative Temp Index, Mech w/impact 1) 155 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 155 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.35 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.7-0.9 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.6-0.8 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 19 g/10 min ASTM D1238
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
Hot-Wire Ignition (HWI), PLC 4 　 ≥0.4 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥0.4 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 3 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
　 　 　 　 　
2110R 　 　 　 　
10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-502535 - -
UL Yellow Card Link 2 　 E121562-100732301 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 7 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 13 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 27 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0009 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0046 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2200 　 　 　 　
20% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification in recognized colors.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Yellow Card Link 2 　 E121562-502535 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 140 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6800 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2200F 　 　 　 　
20% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors.EuropeAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 131 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6890 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2200R 　 　 　 　
20% Glass fiber filled, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Yellow Card Link 2 　 E121562-502535 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 140 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6800 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 480 J/m ASTM D4812
Izod Impact, notched, 23°C 　 90 J/m ASTM D256
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 220 °C ASTM D1525
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.42 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.19 % ASTM D570
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2210 　 　 　 　
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Yellow Card Link 2 　 E121562-502535 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 140 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6800 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 10 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2210EPR 　 　 　 　
20% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 and 5VA listing.AsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E207780-104152645 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.4 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 137 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 137 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Modulus, 5 mm/min 　 6890 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 206 MPa ASTM D790
Flexural Stress, brk, 2.6 mm/min, 100 mm span 　 206 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 6890 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 6890 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 587 J/m ASTM D4812
Izod Impact, notched, 23°C 　 80 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 14 J ASTM D3763
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 210 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 211 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 206 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 213 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 208 °C ASTM D648
CTE, -40°C to 40°C, flow 　 3.60E-05 1/°C ASTM E831
CTE, -40°C to 40°C, xflow 　 7.20E-05 1/°C ASTM E831
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.39 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 13 g/10 min ASTM D1238
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥0.75 mm UL 746A
Hot-Wire Ignition (HWI), PLC 4 　 ≥0.4 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.4 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
　 　 　 　 　
2210F 　 　 　 　
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors.EuropeAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 140 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6800 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 10 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2210R 　 　 　 　
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Yellow Card Link 2 　 E121562-502535 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 140 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6800 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 475 J/m ASTM D4812
Izod Impact, notched, 23°C 　 74 J/m ASTM D256
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 225 °C ASTM D1525
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.42 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.26 % ASTM D570
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 10 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 ≥1.E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2212EPR 　 　 　 　
20% Milled glass filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 and 5VA lising.AsiaAmericas
2212R 　 　 　 　
20% Milled glass filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221097 - -
Glow Wire Flammability Index, 1.5 mm 　 960 °C IEC 60695-2-12
Glow Wire Ignitability Temperature, 1.5 mm 　 875 °C IEC 60695-2-13
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, break, 5 mm/min 　 75 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 8 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 135 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
Vicat Softening Temp, Rate B/120 　 211 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 202 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 189 °C ISO 75/Ae
CTE, -40°C to 150°C, flow 　 3.70E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 4.70E-05 1/°C ISO 11359-2
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.43 g/cm³ ISO 1183
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 7 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2300F (Old to be deleted) 　 　 　 　
30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors.EuropeAmericas
2300FC 　 　 　 　
ULTEM 2300FC resin is a standard flow amorphous polyetherimide (PEI) with 30% glass fiber reinforcement. It is offering a glass transition temperature (Tg) of 217°C. This inherently flame retardant resin has UL94 V0 and 5VA ratings and is RoHS compliant. This grade is US FDA and EU Food Contact compliant and has NSF51 listing for selected colors.EuropeAmericas
2300R (OLD to be deleted) 　 　 　 　
30% Glass fiber filled, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
2310 　 　 　 　
30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221099 - -
UL Yellow Card Link 2 　 E121562-470961 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.2 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
Glow Wire Ignitability Temperature, 2.0 mm 　 900 °C IEC 60695-2-13
Glow Wire Flammability Index, 2.0 mm 　 960 °C IEC 60695-2-12
UV-light, water exposure/immersion 　 F1 - UL 746C
Oxygen Index (LOI) 　 48 % ISO 4589
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-410 °C 　
Nozzle Temperature 　 345-410 °C 　
Front - Zone 3 Temperature 　 345-420 °C 　
Middle - Zone 2 Temperature 　 340-410 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 135-180 °C 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
Screw speed (Circumferential speed) 　 0.15-0.25 m/s 　
Screw Speed 　 40-70 rpm 　
Back Pressure 　 0.3-1.5 MPa 　
ELECTRICAL 3) 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 35 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 50/60 Hz 　 3.3 - IEC 60250
Relative Permittivity, 1 MHz 　 3.4 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0023 - IEC 60250
Dielectric Constant 6) 　 　 　
at 1.1 GHz 　 3.51 - -
at 5 GHz 　 3.59 - -
at 10 GHz 　 3.6 - -
Dissipation Factor 6) 　 　 　
at 1.1 GHz 　 0.0029 - -
at 5 GHz 　 0.0036 - -
at 10 GHz 　 0.0046 - -
Comparative Tracking Index 4) 150 V IEC 60112
Comparative Tracking Index, M 4) 100 V IEC 60112
Volume Resistivity 　 3.00E+16 Ω.cm ASTM D257
Dielectric Strength, in air, 1.6 mm 　 24.8 kV/mm ASTM D149
Dielectric Strength, in oil, 1.6 mm 　 30.3 kV/mm ASTM D149
Relative Permittivity, 1 kHz 　 3.7 - ASTM D150
Dissipation Factor, 1 kHz 　 0.0015 - ASTM D150
Comparative Tracking Index (UL) {PLC} 1) 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 1) ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 1) ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 1) ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 1) ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 1) 3 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 1) 6 PLC Code ASTM D495
PHYSICAL 3) 　 　 　
Density 　 1.51 g/cm³ ISO 1183
Moisture Absorption, (23°C/50% RH/24hrs) 　 0.1 % ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium) 　 0.6 % ISO 62-4
Water Absorption, (23°C/24hrs) 　 0.16 % ISO 62-1
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Melt Volume Rate, MVR at 360°C/5.0 kg 　 8 cm³/10 min ISO 1133
Specific Gravity 　 1.51 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.16 % ASTM D570
Water Absorption, (23°C/Saturated) 　 0.9 % ASTM D570
Melt Flow Rate, 337°C/6.6 kgf 　 7.6 g/10 min ASTM D1238
Mold Shrinkage, flow, 3.2 mm 5) 0.2-0.4 % SABIC method
THERMAL 3) 　 　 　
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 215 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 210 °C ISO 75/Af
Vicat Softening Temp, Rate A/50 　 225 °C ISO 306
Vicat Softening Temp, Rate B/120 　 220 °C ISO 306
Vicat Softening Temp, Rate B/50 　 213 °C ISO 306
CTE, -40°C to 150°C, flow 　 1.80E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 4.80E-05 1/°C ISO 11359-2
Thermal Conductivity 　 0.31 W/m-°C ISO 8302
Ball Pressure Test, 125°C +/- 2°C 　 PASS - IEC 60695-10-2
HDT, 0.45 MPa, 3.2 mm, unannealed 　 215 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 212 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 211 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 210 °C ASTM D648
CTE, -20°C to 150°C, flow 　 1.80E-05 1/°C ASTM E831
CTE, -20°C to 150°C, xflow 　 4.80E-05 1/°C ASTM E831
Relative Temp Index, Elec 1) 180 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 180 °C UL 746B
IMPACT 3) 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 10 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 10 kJ/m² ISO 180/1A
Izod Impact, unnotched 80*10*4 +23°C 　 40 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 40 kJ/m² ISO 180/1U
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Izod Impact, notched, 23°C 　 90 J/m ASTM D256
Izod Impact, notched, -30°C 　 80 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 470 J/m ASTM D256
Izod Impact, unnotched, 23°C 　 600 J/m ASTM D4812
Izod Impact, unnotched, -30°C 　 600 J/m ASTM D4812
MECHANICAL 3) 　 　 　
Tensile Stress, break, 5 mm/min 　 175 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2.4 % ISO 527
Tensile Modulus, 1 mm/min 　 10500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 240 MPa ISO 178
Flexural Modulus, 2 mm/min 　 9600 MPa ISO 178
Ball Indentation Hardness, H358/30 　 165 MPa ISO 2039-1
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Hardness, Rockwell M 　 110 - ISO 2039-2
Tensile Stress, brk, Type I, 5 mm/min 　 175 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2.5 % ASTM D638
Tensile Modulus, 5 mm/min 　 10400 MPa ASTM D638
Flexural Stress, brk, 2.6 mm/min, 100 mm span 　 230 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 9400 MPa ASTM D790
Flexural Stress, brk, 1.3 mm/min, 50 mm span 　 250 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 9700 MPa ASTM D790
Hardness, Rockwell M 　 114 - ASTM D785
　 　 　 　 　
2310EPR 　 　 　 　
30% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221095 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.4 mm UL 94
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
ELECTRICAL 1) 3) 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥0.75 mm UL 746A
Hot-Wire Ignition (HWI), PLC 4 　 ≥0.4 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.4 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
THERMAL 3) 　 　 　
Vicat Softening Temp, Rate B/50 　 217 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 205 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 201 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 208 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 205 °C ASTM D648
CTE, -40°C to 150°C, flow 　 1.80E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 3.00E-05 1/°C ASTM E831
Thermal Conductivity 　 0.31 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.80E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 3.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASS - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 214 °C ISO 306
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 207 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 196 °C ISO 75/Af
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
IMPACT 3) 　 　 　
Izod Impact, unnotched, 23°C 　 450 J/m ASTM D4812
Izod Impact, notched, 23°C 　 85 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 9 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 10 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 10 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 30 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
MECHANICAL 3) 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 158 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 158 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 2.1 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2.1 % ASTM D638
Tensile Modulus, 5 mm/min 　 8580 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 228 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 9140 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 160 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 160 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 2 % ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 8970 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 9500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 160 MPa ISO 2039-1
PHYSICAL 　 　 　 　
Specific Gravity 　 1.48 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 4) 0.3-0.5 % SABIC method
Mold Shrinkage, flow, 3.2 mm 4) 0.4-0.6 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.4-0.6 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 11 g/10 min ASTM D1238
Density 　 1.48 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.5 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 12 cm³/10 min ISO 1133
　 　 　 　 　
2310F (old to be deleted) 　 　 　 　
30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors.EuropeAmericas
2310R (old to be deleted) 　 　 　 　
30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
2312 　 　 　 　
30% Milled glass filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221100 - -
Glow Wire Flammability Index, 1.5 mm 　 960 °C IEC 60695-2-12
Glow Wire Ignitability Temperature, 1.5 mm 　 875 °C IEC 60695-2-13
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.81 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, break, 5 mm/min 　 85 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 3 % ISO 527
Tensile Modulus, 1 mm/min 　 6000 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 145 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 160 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 -40°C 　 5 kJ/m² ISO 180/1A
Izod Impact, unnotched 80*10*4 +23°C 　 20 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 20 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 4 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 25 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 25 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.3 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 2.30E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 2.70E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 220 °C ISO 306
Vicat Softening Temp, Rate B/50 　 211 °C ISO 306
Vicat Softening Temp, Rate B/120 　 213 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 206 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 192 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.2-0.4 % SABIC method
Density 　 1.51 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.5 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 12 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Relative Permittivity, 1 MHz 　 3.4 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.81 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.81 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 0 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 7 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2312EPR 　 　 　 　
30% Milled glass filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221101 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.4 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 94 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 94 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 2 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2 % ASTM D638
Tensile Modulus, 5 mm/min 　 6480 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 156 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 5580 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 80 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 80 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 2 % ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 5300 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 145 MPa ISO 178
Flexural Modulus, 2 mm/min 　 5500 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 330 J/m ASTM D4812
Izod Impact, notched, 23°C 　 39 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 15 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 25 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 25 kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 5 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 25 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 25 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 216 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 204 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 199 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 206 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 202 °C ASTM D648
CTE, -40°C to 150°C, flow 　 3.20E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 3.50E-05 1/°C ASTM E831
Thermal Conductivity 　 0.32 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 3.70E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 3.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 211 °C ISO 306
Vicat Softening Temp, Rate B/120 　 213 °C ISO 306
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 204 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 192 °C ISO 75/Af
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.48 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.4-0.6 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.4-0.6 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 13.7 g/10 min ASTM D1238
Density 　 1.48 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.5 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 14 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥0.75 mm UL 746A
Hot-Wire Ignition (HWI), PLC 4 　 ≥0.4 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.4 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
2400 　 　 　 　
40% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. WRAS certification in recognized colors.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221103 - -
UL Yellow Card Link 2 　 E45587-236985 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
Glow Wire Ignitability Temperature, 1.5 mm 　 875 °C IEC 60695-2-13
Glow Wire Ignitability Temperature, 1.0 mm 　 850 °C IEC 60695-2-13
Glow Wire Flammability Index, 1.5 mm 　 960 °C IEC 60695-2-12
Glow Wire Flammability Index, 1.0 mm 　 960 °C IEC 60695-2-12
Oxygen Index (LOI) 2) 54 % ASTM D2863
NBS Smoke Density, Flaming, Ds 4 min 2) 1 - ASTM E662
Oxygen Index (LOI) 2) 48 % ISO 4589
MECHANICAL 2) 　 　 　
Tensile Stress, brk, Type I, 5 mm/min 　 179 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2.5 % ASTM D638
Tensile Modulus, 5 mm/min 　 11720 MPa ASTM D638
Flexural Stress, brk, 2.6 mm/min, 100 mm span 　 241 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 11720 MPa ASTM D790
Hardness, Rockwell M 　 114 - ASTM D785
Tensile Stress, break, 5 mm/min 　 180 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 11500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 240 MPa ISO 178
Flexural Modulus, 2 mm/min 　 10000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 170 MPa ISO 2039-1
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
IMPACT 2) 　 　 　
Izod Impact, notched, 23°C 　 112 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 480 J/m ASTM D256
Izod Impact, unnotched, 23°C 　 427 J/m ASTM D4812
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
Charpy 　 　 　 　
23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
-30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
THERMAL 2) 　 　 　
Vicat Softening Temp, Rate B/50 　 234 °C ASTM D1525
HDT, 0.45 MPa, 6.4 mm, unannealed 　 215 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 212 °C ASTM D648
CTE, -20°C to 150°C, flow 　 1.40E-05 1/°C ASTM E831
Thermal Conductivity 　 0.33 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.40E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 230 °C ISO 306
Vicat Softening Temp, Rate B/50 　 217 °C ISO 306
Vicat Softening Temp, Rate B/120 　 225 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 215 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 2) 　 　 　
Specific Gravity 　 1.61 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.13 % ASTM D570
Water Absorption, (23°C/Saturated) 　 0.9 % ASTM D570
Melt Flow Rate, 337°C/6.6 kgf 　 4.2 g/10 min ASTM D1238
Mold Shrinkage, flow, 3.2 mm 4) 0.1-0.3 % SABIC method
Mold Shrinkage on Tensile Bar, flow 4) 0.1-0.3 % SABIC method
Density 　 1.61 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.8 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.4 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 5 cm³/10 min ISO 1133
ELECTRICAL 2) 　 　 　
Volume Resistivity 　 1.50E+16 Ω.cm ASTM D257
Dielectric Strength, in oil, 1.6 mm 　 24 kV/mm ASTM D149
Relative Permittivity, 1 kHz 　 3.7 - ASTM D150
Dissipation Factor, 1 kHz 　 0.002 - ASTM D150
Comparative Tracking Index (UL) {PLC} 1) 5 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 1) ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 1) ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 1) 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 35 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3.1 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0025 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0019 - IEC 60250
Comparative Tracking Index 　 150 V IEC 60112
Comparative Tracking Index, M 　 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
INJECTION MOLDING 3) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
2400F 　 　 　 　
40% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Resin is RoHS compliant. UL94 V0 listing. US FDA and European Food Contact approved. Effective June, 2007 this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HU2400.Europe
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221103 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
Glow Wire Ignitability Temperature, 1.5 mm 　 875 °C IEC 60695-2-13
Glow Wire Ignitability Temperature, 1.0 mm 　 850 °C IEC 60695-2-13
Glow Wire Flammability Index, 1.5 mm 　 960 °C IEC 60695-2-12
Glow Wire Flammability Index, 1.0 mm 　 960 °C IEC 60695-2-12
Oxygen Index (LOI) 　 48 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 180 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 11500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 240 MPa ISO 178
Flexural Modulus, 2 mm/min 　 10000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 170 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.33 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.40E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 230 °C ISO 306
Vicat Softening Temp, Rate B/50 　 217 °C ISO 306
Vicat Softening Temp, Rate B/120 　 225 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 215 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.1-0.3 % SABIC method
Density 　 1.61 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.8 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.4 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 5 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 35 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3.1 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0025 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0019 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 5 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 370-410 °C 　
Front - Zone 3 Temperature 　 380-420 °C 　
Middle - Zone 2 Temperature 　 370-410 °C 　
Rear - Zone 1 Temperature 　 350-390 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2410 　 　 　 　
40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221104 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
Glow Wire Flammability Index 960°C, passes at 　 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 48 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 180 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 11500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 240 MPa ISO 178
Flexural Modulus, 2 mm/min 　 10000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 170 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.29 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 1.40E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 4.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 230 °C ISO 306
Vicat Softening Temp, Rate B/50 　 217 °C ISO 306
Vicat Softening Temp, Rate B/120 　 225 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 215 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.1-0.3 % SABIC method
Density 　 1.61 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.8 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.4 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 35 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3.1 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0025 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0019 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 5 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 370-410 °C 　
Front - Zone 3 Temperature 　 380-420 °C 　
Middle - Zone 2 Temperature 　 370-410 °C 　
Rear - Zone 1 Temperature 　 350-390 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2410EPR 　 　 　 　
40% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release for enhanced electroplatability. ECO Conforming, UL94 V0 listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221105 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.4 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 165 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 165 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 1.8 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 1.8 % ASTM D638
Tensile Modulus, 5 mm/min 　 11100 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 240 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 10650 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 170 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 170 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 2 % ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 11000 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 220 MPa ISO 178
Flexural Modulus, 2 mm/min 　 9500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 165 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 410 J/m ASTM D4812
Izod Impact, notched, 23°C 　 82 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 18 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 10 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 10 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 30 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 223 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 212 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 204 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 215 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 208 °C ASTM D648
CTE, -40°C to 150°C, flow 　 1.50E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 4.50E-05 1/°C ASTM E831
Thermal Conductivity 　 0.3 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.50E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 214 °C ISO 306
Vicat Softening Temp, Rate B/120 　 215 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 208 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 206 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 197 °C ISO 75/Af
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.56 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.2-0.4 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.2-0.4 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.3-0.5 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 8.9 g/10 min ASTM D1238
Density 　 1.56 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.8 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.4 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 11 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥1.5 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥0.75 mm UL 746A
Hot-Wire Ignition (HWI), PLC 4 　 ≥0.4 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.4 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
2410R 　 　 　 　
40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221104 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 48 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 180 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 11500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 240 MPa ISO 178
Flexural Modulus, 2 mm/min 　 10000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 170 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 427 J/m ASTM D4812
Izod Impact, notched, 23°C 　 112 J/m ASTM D256
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 234 °C ASTM D1525
Thermal Conductivity 　 0.33 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.40E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 230 °C ISO 306
Vicat Softening Temp, Rate B/50 　 217 °C ISO 306
Vicat Softening Temp, Rate B/120 　 225 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 215 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.61 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.13 % ASTM D570
Mold Shrinkage on Tensile Bar, flow 　 0.1-0.3 % SABIC method
Density 　 1.61 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.8 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.4 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 35 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3.1 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0025 - IEC 60250
Dissipation Factor, 1 kHz 　 0.002 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0019 - IEC 60250
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 5 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 370-410 °C 　
Front - Zone 3 Temperature 　 380-420 °C 　
Middle - Zone 2 Temperature 　 370-410 °C 　
Rear - Zone 1 Temperature 　 350-390 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
3452 　 　 　 　
45% Glass fiber and mineral filled, enhanced flow Polyetherimide (Tg 217C) with enhanced dimensional stability. ECO Conforming, UL94 V0 and 5VA listing in recognized colors.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221107 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.77 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, break, 50 mm/min 　 100 MPa ISO 527
Tensile Strain, break, 50 mm/min 　 1.5 % ISO 527
Tensile Modulus, 1 mm/min 　 12500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 150 MPa ISO 178
Flexural Modulus, 2 mm/min 　 12000 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 14 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 13 kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 14 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 14 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
CTE, -40°C to 150°C, flow 　 1.90E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 3.60E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate B/50 　 205 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 207 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Ae
Relative Temp Index, Elec 1) 180 °C UL 746B
Relative Temp Index, Mech w/impact 1) 180 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 180 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.25 % SABIC method
Density 　 1.66 g/cm³ ISO 1183
Melt Volume Rate, MVR at 360°C/5.0 kg 　 8 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 >1.E+13 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3.6 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.01 - IEC 60250
Dissipation Factor, 1 MHz 　 0.015 - IEC 60250
Comparative Tracking Index 2) 125 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.7 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
4000